Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

KMC MissingLink Connector
$1.00 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Problem Solvers Handlebar Clamp Shim
$9.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Surly Hurdy Gurdy
$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
Shimano In-Line Brake Cable Adjuster
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Problem Solvers Cable Doubler
$55.99 - $79.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
Problem Solvers Quick-Release Nut Light Mount
$19.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
Surly Constrictor Seatpost Clamp
$15.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
SRAM PowerLock Link Chain Connector
$5.00 - $5.50
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM PowerLock Eagle Chain Connector 12-Speed
$17.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
SRAM Power Link Chain Connector
$17.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
Surly Stainless Seatpost Clamp
$20.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.
Wheels Manufacturing Inc. Chainstay Protector - Wide
$6.25
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Surly Singleator Pull-Up Spring
$4.20
- Replacement pull-up spring for the Surly Chain Tensioner
Surly MDS Dropout Chips
$33.50 - $50.00
The 12mm slotted MDS dropout is the newest chip for Surly's MDS equipped trail frames. You like chips, don't you? The 12mm slotted dropout chip uses a standard derailleur mount for maximum compatibility and is made of cast and machined 6061-T6 aluminum, with a fender eyelet. What's the coolest part about the 12mm slotted MDS chip, you ask? The fact that it also has the capability to run a 12 x 142mm thru-axle in a single speed configuration. This is good news because single speeds are good news. When you get an MDS equipped frame you're getting the option to set it up however you want. You can run a 142 x 12mm thru-axle rear end with a direct mount Shimano hanger, standard 135mm QR or The Mighty Singlespeed. The way this will work is that Surly complete bikes that feature the MDS will ship with whatever chip is compatible with derailleur spec. For instance, the complete Instigator 2.0 ships with the 142 x 12mm thru-axle Shimano chip. If you want to change it to a singlespeed later (and why wouldn't you?), all you have to do is get the SS chip. Frames will ship with all three MDS chips so pick your poison. The 142 x 12mm and 135mm QR chips are made of cast and machined 6061-T6 aluminum and The Mighty Singlespeed chip is 304 stainless steel, because the two words 'aluminum' and 'singlespeed' should never be too close to each other. Bad things can happen…. As you can see, the MDS gives you not just different build options, it lets you use a more varied selection of parts for your frame up builds. The MDS is featured on most of our trail bikes. That's right: Krampus Ops, Karate Monkey Ops, Instigator 2.0 and Ice Cream Truck frames all sport these puppies.
Problem Solvers GXP Spindle Adapter Kit
$36.99
The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.
Problem Solvers 1-inch Headset Spacers
$5.00 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm
Fizik TechNoGel Tri Pads
$29.99
Replace your old aerobar armrest pads and upgrade to the comfort of Fizik's TechNoGel Tri Pads. Made from Fizik's shock-absorbing Technogel, these cut-to-fit pads make every second in the aero position easier and more comfortable. Plus, the pads are easily removed for cleaning.
Campagnolo EPS Front Derailleur Stiffener
$85.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Salsa Lock-on Collars Closed-End
$15.00
- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair
Salsa Flip-Lock Seat Clamp
$37.00
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean
Salsa Alternator 1.0 Left Plate
$30.00 - $50.00
Replacement swing plates for Alternator 1.0 dropouts.
Salsa Single Frame Plug for Dropper Routing 5-pack
$4.99
Single Frame Plug for Dropper Routing
Salsa Alternator 1.0 Right Plate
$30.00
Replacement swing plates for Alternator 1.0 dropouts.
Salsa Alternator 2.0 Dropout Right Plate
$30.00
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate
Salsa Rack-Lock Seat Collar
$32.00
Rack-Locks are one part form, two parts function. Sure, they still look great and do a great job of keeping your seatpost in place, but they also provide a mounting position for the front struts of a rack. - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available in 30.0, 32.0, 35.0, and 35.4 mm sizes - Black anodized with laser-etched logo - 45g for a 32.0mm collar
Salsa Post-Lock Rack Mount
$32.00
Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts
Salsa Alternator 2.0 Hardware Kit
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
Salsa Alternator Flat Mount Non-Drive Side
$29.99
Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Accommodates a 12mm thru-axle - Allows the rear axle to be adjusted through a 15mm range - Note: This part number only includes a single Alternator Flat Mount plate - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame
Cane Creek 10-Series Interlok Headset Spacer
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Page 1 of 19 Next page