Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Bottom Brackets
$54.00 - $60.00
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
$46.00
The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.
- One oversized spindle to work across every bottom bracket standard.
- Significantly lighter than PFGXP system
- Easier installation by allowing you to press the bearing cups into the frame
- Easy installation
- Two fully sealed cartridge bearings
- ISO 4210 compliant. See Declaration of Conformity for details.
- BB-frame interface PressFit (Road: 86.5mm)
- Crank-BB interface DUB
- Bearing type Standard
- Spindle diameter DUB
- Cup material Steel
$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
$46.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
$50.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
$46.00
The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.
- One oversized spindle to work across every bottom bracket standard.
- Significantly lighter than PFGXP system
- Easier installation by allowing you to press the bearing cups into the frame
$50.00
The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.
- One oversized spindle to work across every bottom bracket standard.
- Greater bearing durability
- Easy installation
- PressFit cups for lighter weight
- Integrated adjuster
- ISO 4210 compliant. See Declaration of Conformity for details
- Bearing type Standard
- Spindle diameter DUB
- Cup material Aluminum
$218.75
Expand your choice of cranks for use in BB86/BB92/BB91/BB71-41/BB107 frames. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks (FSA BB386EVO, Rotor 3d+, RaceFace Next SL, e.thirteen) cranks in your frame. These bearings fit directly in frames with 41mm ID smooth bore bottom bracket shells.You must use 30mm spindle cranksets with spindle lengths longer than 104mm. - Bearings: Enduro Dual-Row ABEC-3 - Dimensions: 41mm x 30mm (42mm flange OD) - Color: silver - Bottom Bracket/Frame Interface: BB86, BB92, BB91, BB71-41, BB107/104 - Bottom Bracket Shell Width (mm): 86.5mm - 107mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: BB386EVO, BB30 longer than 104mm - Crank Spindle Diameter: 30mm - Weight: 89g
$359.00
This bottom bracket is perfect for when you have a PF30, BBright, or 386EVO shell frame and want to install a crank with a 30mm spindle into the frame. All these frame standards have a 46mm inner diameter and smooth insides, though the widths vary from 68mm to 86mm.
This bottom bracket features nearly zero loss of power due to friction, thanks to the CeramicSpeed's incredibly efficient bearings. Choose either our Standard or Coated Bearings—both have super-round, super-smooth CeramicSpeed balls rolling on hardened-steel races. The Coated version has a metallic coating laid onto the races, making them even harder and smoother and resulting in longer life and lower drag. They come installed in cups.
30mm spindles on cranks are increasingly popular because of the high stiffness and low weight. 46mm inner diameter bottom brackets are popular for the freedom they offer designers in building frames. Because of the variety of widths, the cups here extend into the shell and come with a telescoping spacer tube to further seal and stiffen the system.
The bottom bracket is already stiff thanks to hard ceramic bearings and hardened-steel races. Thanks to CeramicSpeed, it also generates nearly zero drag. Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction versus conventional BBs. The bearings also last at least 3x longer than other bearings.
You can change the grease to fine-tune your BB's performance characteristics. TT and Track, All Round, and LongLife are greases CeramicSpeed designed. The first has the least drag, while the last is the most durable. All Round, in the middle, comes standard in road bearings.
In The Box
- 2 cups with bearings installed
- 2 1mm spacers
- 2 0.5mm spacers
- 2 dust covers
- O-ring
- Spacer tube
- 10ml All Round Grease
- Sticker sheet
$15.99
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
$19.99
- Deore-level BB92 press-fit Hollowtech II bottom bracket
- Compatible with all mountain Hollowtech II cranks
$123.99
T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
- BB Cups with bearings
- 2x Silicone dust seals
- 2x 0.5mm crank spindle spacers
- 2x 1.0mm crank spindle spacers
- 1x 2.5mm crank spindle spacer
Specifications:
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: T47
- Bottom Bracket Shell Width (mm): 68mm - 100mm
- Bottom Bracket Shell I.D.: 47x1.0mm Threaded
- Crank Spindle Diameter: 29mm
- Over Bearing Width: 90.8mm in 68mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Tool Pattern: 48.5mm x 16-notch
- Weight: 155g
Compatible with the following Bottom Bracket Standards (47x1.0mm Threaded BB shell) and 29mm diameter spindle SRAM DUB compatible cranks:
- T47 shell with a width of 68mm and SRAM DUB Road Crank
- T47 shell with a width of 73mm and SRAM DUB MTB Crank
- T47 shell with a width of 100mm and SRAM DUB Fatbike Crank
$124.99
The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance.
- 440C stainless steel bearings, dual lip seal, marine grease
- Machined aluminum cups
$130.00
Surly OD Bottom Brackets
- Compatible with 24mm spindles
- Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard
$30.00
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
$59.99
Spinning and Grinning
This rock-solid, durable performer is everything you need in a press-fit 24mm bottom bracket and nothing more. Roll on...and on...and on.
In A Sea Of Bearings
These little buggers can make a huge difference, so we've made sure our double row custom retainer bearings are super durable and up for the long run.
Close Enough Won't Cut It
These precision steel cup are coated for corrosion resistance, and CNC-ground surfaces of this bottom bracket provide an exact, perfectly quiet fit in your frame.
Weather, Or Not
All RF bottom brackets come with an inner plastic sleeve to keep the elements out and include all appropriate spacers to ensure a versatile fit.
$35.00
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
$359.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency.
The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product.
The BB30 for SRAM DUB Road comes in two versions; one using our CeramicSpeed Standard Bearings and the other using our Coated Bearings for even longer lifetime and lower friction.
Compatible with:
- Frame: BB30
- Opening diameter: 42mm
- Shell width: 68mm
- Bottom Bracket Tool for installation: BBT-79
In the box:
- 2 cups with CeramicSpeed Bearings installed
- 2 dust covers
- 4 x 1mm spacers
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker Sheet
$65.00
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks
- BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks
- BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself)
- BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks
- BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks
- BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks
- BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks
- BB-4000 is for 19mm spindle 69mm shell Omega cranks
- BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks
- 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
$121.50
By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 29mm spindle SRAM DUB cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 73mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16 notch - Weight: 156g
$74.99 - $89.99
As The Wheel Turns
This trusty 30mm workhorse of a bottom bracket is built with custom RF double row cartridge bearings for trouble-free, long haul rolling for you PF41 frame.
In A Sea Of Bearings
These little buggers can make a huge difference, so we've made sure our double row custom retainer bearings are super durable and up for the long run.
Close Enough Won't Cut It
These precision steel cup are coated for corrosion resistance, and CNC-ground surfaces of this bottom bracket provide an exact, perfectly quiet fit in your frame.
Weather, Or Not
All RF bottom brackets come with an inner plastic sleeve to keep the elements out and include all appropriate spacers to ensure a versatile fit.
$100.28
External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g
$144.53
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 127g
$29.00
The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces.
- Alloy cups
- Double "snap" seals for water and dirt protection
- Spindle Interface Type: Square Taper JIS
$29.00
FSA PowerPro JIS Cartridge Bottom Brackets.
- Includes bolts
- Spindle Interface Type: Square Taper JIS
- BB Shell Width (mm): 68
- BB/Frame Interface: English
$359.00 - $459.00
The PF30 standard is widely used. To make it compatible with Shimano and other 24mm diameter cranks, as well as improve the system, select this bottom bracket.
The package comes with two cups and CeramicSpeed Bearings installed. The cups have extended inner sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system while also eliminating spindle rub on internal cables. The cups mate with 24/22mm crank spindles. There are two bearing options. Both Standard and Coated Bearings feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life.
The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer.
The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings.
All Round Grease is installed in the bearings. It can be replaced for lower-drag TT and Track Grease or higher-durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions.
In The Box
- 1 bottom bracket with bearings installed
- 2 dust covers
- 10ml syringe of All Round Grease
- Sticker sheet
$132.30
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch
$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Designed for use with SRAM Wide Cranksets
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
$46.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
$41.00
Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down. This GXP100 bottom bracket matches SRAM's Fat Bike cranks.
Page 1 of 3
Next page