Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
$12.99 - $13.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.
Yakima Tracks offer easy connectivity, and a low profile when the towers are removed. Combine the Tracks with Yakima Control Towers plus a set of their Landing Pads and you have a versatile, adjustable base for your rooftop car rack system (towers, pads and accessories sold separately). The Tracks come in pairs in 42- and 54-inch lengths with hardware for mounting on sheet metal, and 54- and 60-inch lengths with hardware for use with fiberglass.
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating\ TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
$39.00 - $49.00
If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang
$49.95 - $54.95
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.
A tough, dependable tie down, the SoftStrap delivers strength and protection. Durable webbing secures the load, a neoprene cover protects boats, coolers and vehicles, and an integrated hook and loop cover stashes excess strap so it’s not flapping in the breeze. Product Details - Long 8 to 16-foot tie down secures kayaks and larger gear - Neoprene cover protects boats, gear and vehicle - Integrated hook and loop cover makes it easy to stash excess strap - Sold as a pair - Combine with our Aero Crossbar Pads for an easy to use surf setup
$119.00 - $219.00
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”
Rear wheel strap for Boa bike mount. Includes one strap.
The RockyMounts LoBall Locking is a bolt-on bike rack for trucks, trailers, vans, SUV's, and home storage. It includes a locking 9mm quick release, lock core, and two keys.
$150.00 - $160.00
- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps
$18.95 - $44.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
$59.95 - $74.95
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Page 1 of 8 Next page