Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$9.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
$11.99
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
$19.00
- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1
$70.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.
$1.00 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$59.00
The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
$7.50 $10.00 25% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
$10.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$18.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$21.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.
$12.00
Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$20.00
RaceFace Aeffect R Dropper Post Small Parts.
$16.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains
$108.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm
$55.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$18.38
Loose ball bearings in bags or bottles. - Replacement loose ball bearings
$8.95 - $16.50
Replacement derailleur hanger screws for Syntace X-12 system.
$5.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$33.50 - $35.00
The 12mm slotted MDS dropout is the newest chip for Surly's MDS equipped trail frames. You like chips, don't you? The 12mm slotted dropout chip uses a standard derailleur mount for maximum compatibility and is made of cast and machined 6061-T6 aluminum, with a fender eyelet. What's the coolest part about the 12mm slotted MDS chip, you ask? The fact that it also has the capability to run a 12 x 142mm thru-axle in a single speed configuration. This is good news because single speeds are good news. When you get an MDS equipped frame you're getting the option to set it up however you want. You can run a 142 x 12mm thru-axle rear end with a direct mount Shimano hanger, standard 135mm QR or The Mighty Singlespeed. The way this will work is that Surly complete bikes that feature the MDS will ship with whatever chip is compatible with derailleur spec. For instance, the complete Instigator 2.0 ships with the 142 x 12mm thru-axle Shimano chip. If you want to change it to a singlespeed later (and why wouldn't you?), all you have to do is get the SS chip. Frames will ship with all three MDS chips so pick your poison. The 142 x 12mm and 135mm QR chips are made of cast and machined 6061-T6 aluminum and The Mighty Singlespeed chip is 304 stainless steel, because the two words 'aluminum' and 'singlespeed' should never be too close to each other. Bad things can happen…. As you can see, the MDS gives you not just different build options, it lets you use a more varied selection of parts for your frame up builds. The MDS is featured on most of our trail bikes. That's right: Krampus Ops, Karate Monkey Ops, Instigator 2.0 and Ice Cream Truck frames all sport these puppies.
$6.00
- Replacement slider for the Surly Tuggnut and Snuggnut
$30.00
Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy
$26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$5.00
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
Page 1 of 28 Next page